PRICE: $129.99
Suggested placement: This camera is a great selection for any outdoor area. Use it to watch the front of your house or garage. Watch parking lots and sidewalks, plazas and public parks. Good for urban and city areas where the camera may attract unwanted attention and possible physical attacks.
This indoor/outdoor dome camera has a reinforced, coated acrylic dome with high impact resistance and a high grade hard aluminum base. This design gives the camera a high tamper/vandal resistance factor which, combined with a high resolution sensor and wide angle lens, greatly increases its usability in environments that would make a lesser camera unsuitable. Selectable power, 12VDC or 24VAC. Innovative electronics allow the installer to connect DC power (if used) in either direction so it is impossible to burn up this camera by connecting power backwards.
This security camera is designed for environments with a high potential for abuse, such as bus stops, public plazas and enclosed stairways. The crisp and clear high resolution video provides excellent images. The tough dome and hardened aluminum shell keep this camera operational during attacks that would immediately destroy a non-vandal resistance camera.
Options Available at checkout: Power adapter, black or white cables.
SPECIFICATIONS
- High resolution 1/3" Panasonic color video sensor with Sharp digital digital signal processing chipset
- High Resolution: 480 horizontal lines
- Effective pixels: 768 x 494 (379k)
- Sealed construction for rain proofing and weather proofing, vandal and tamper resistant design - perfect for outdoor plazas, parks, sidewalk observation, garage, driveway and breeze ways
- Minimum illumination 0.5 Lux (F1.6)
- Signal-to-noise ratio: ~48db
- Scanning system 2:1 interlace
- 4.3mm aspherical lens
- Auto gain control (AGC), auto white balance, and back light compensation
- Video output: 1Vp-p composite video / 75 ohms
- Power: 12VDC or 24VAC, selectable at time of installation
- Attached video/power cord combination.
- Power cord has stripped and pre-tinned leads ready for direct connection to power
- DC power connection is non-polarized (impossible to connect DC power backwards) - you can not burn this camera up by connecting power backwards
- Hardware installation pack and mounting gasket included.
- One year warranty.
|
|