PRICE: $219.99

Suggested placement: This camera is a great selection for store front, behind counters, and overlooking display cases and cash registers. The internal test monitor output makes changes easy so it's a great time saver if you're putting a camera up in an area that might change due to placement of furniture, artwork, vendor booths, kiosks, and similar objects that force you to alter the aim of the camera.

60' Infrared Range

This infrared outdoor dome camera has an extra high resolution Sony HQ1 video sensor, a built-in infrared LED array, and a reinforced, coated acrylic dome with high impact resistance (tested with 10lb sledgehammer) coupled with a high grade hard aluminum alloy base. This design gives the camera a high tamper/vandal resistance factor making it perfect for outdoor use in many situations, including urban surveillance scenarios where a lesser camera wouldn't last. Other features include optional cable routing feature and anti-tamper screws.

Enhanced video quality under low and no visible light is possible due to the Sony infrared sensitive video sensor, an aspherical lens, an automatic IR cut filter, and an array of infrared LEDs under Smart Technology control. The camera automatically senses brightness and available light and turns on groups of IR LEDs in 4 stages - 6, 12, 18, and 30 units on/off as required.

Advanced design features make this camera easy to setup, install and maintain. You can select 12VDC or 24VAC power input (the camera accepts either with no special settings). When you place it or move it you can easily check the aim and focus with a portable monitor - a test composite output (RCA jack) is built into the camera itself so there's no need for a second person or a trip to a remote location to verify camera aim. The internal bracket design allows movement in 3 axis, so you can point the camera virtually anywhere once you've attached it to a wall or ceiling.

Options Available at checkout: Power adapter, black or white cables.

SPECIFICATIONS

• Infrared range: 20 meters (65.6 feet)
• 1/3" color Sony HQ1 CCD high resolution video sensor
• Extra high resolution: 540 lines
• Effective pixels: 768 x 494 (379k)
• 3.6mm aspherical lens
• Automatic IR cut filter - minimizes image distortion when switching between daylight and night time operation
• Weatherproof: sealed against wind, snow and rain.
• NTSC (PAL available)
• Minimum illumination 0.5 lux (F1.2), 0.0 lux with IR on
• 30 units IR LEDs operating at 850nm with threshold sensing Smart IR technology for automatic control, turning on/off groups as required so the image is never washed out by too much IR.
• Hardened acrylic dome, coated and designed to eliminate internal IR glare that would effect video quality
• Auto electronic shutter
• Auto-gain control (AGC)
• Auto-white balance
• Back light compensation
• Signal-to-noise ratio: ~48db
• Scanning system 2:1 interlace
• Video output: 1Vp-p composite video / 75 ohms
• Dual power input for flexibility. (Select either 12VDC or 24VAC)
• Current draw: approximately 300mA, 530mA with IR on (nominal)
• Operating temperature: 14° to 113° F (-10° to 45° C)
• Weight: 630.5g (1.39lbs)
• Dimensions: 6.18" diameter x 3.78" tall (157mm x 96mm)
• Attached video/power cord combination.
• Hardware installation pack and mounting gasket included.
• Anti-tamper screws hold assembly together.
• Designed to route cables through mounting surface or using alternate outlet (threaded, sealed port for surface cable routing/conduit attachment if desired)
• One year warranty.
• Purchase this camera now for $219.99!
• Please visit the Q5 USA security warehouse to find more security cameras and accessories that make your surveillance system easy and comfortable to use.

Facts about our Infrared Security Cameras

Infrared light lies between the visible and invisible (microwave) portions of the electromagnetic spectrum. Infrared light has a range of wavelengths just like visible light has wavelengths that range from red light to violet. "Near infrared" light is closest in wavelength to visible light and "far infrared" is closer to the microwave region of the electromagnetic spectrum. The longer wavelengths are about the size of a pin head and the shorter, near infrared ones are the size of cells, or are microscopic. The human eye is not designed to pick up infrared light so a beam of infrared light is invisible. The source of the infrared light, depending on the wavelength, may or may not be visible as a small red or orange-red dot (about the size of a match head).

Our infrared security cameras detect infrared light reflected from objects in the field of view. The image appears in monochrome (black-and-white). These cameras contain an internal array of infrared LEDs under automatic control. The range of detectable infrared light cast by each array depends on the video sensor and the camera design (number and placement of IR LEDs). Check each camera description for the IR LED range specification to be sure of the range for the security camera in question - we have cameras that cast a 30', 60', and 120' beam (or greater). We also carry IR projectors that are designed to cast a wide, long range IR beam for cameras that do not have internal IR LEDs. Keep in mind that atmospheric conditions will effect the effective range (fog, snow, rain, etc.).

All of our infrared cameras auto-switch between normal daylight color mode and infrared monochrome mode without user intervention of any kind.