PRICE: $99.99

Suggested placement: With a built-in motion detector you can place this hidden camera anywhere you need surveillance plus intrusion detection. Works great near doors and windows, in storage rooms, behind cash registers, behind counters or areas where queues form, and anywhere else you need surveillance. As a motion detector place it anywhere you need to monitor for unauthorized movement.

Hidden Camera PLUS Motion Detector

High resolution video is generated by a premium quality 1/3" CCD video sensor that provides an excellent image with low lag and high burn resistance and is not subject to distortion from magnetic fields. A digital signal processing chipset helps insure that all signals are clean and free of distraction (like static and video artifacts).

The case looks just like any regular motion detector you'd see anywhere, but the hidden camera (pinhole lens with a wide angle field of view) makes it far more useful as a surveillance device. It can be connected to a lamp or to external alarms. A jumper lets you set the "on" time to 30/60/120 seconds when detecting motion. The security camera can be configured to provide video all the time or ONLY when motion is detected.

Motion Detector and Hidden Camera Configuration Settings (User/Setup Manual Included): An internal jumper is provided to set up the camera and the alarm/lamp relays. The camera can be set to turn on ONLY when motion is detected OR to remain on at all times. The alarm/lamp relay can be set to turn on (when motion is detected) for 10, 30, or 120 seconds. If, after that time, there is still motion in the detection area the alarm/lamp will remain on until the motion stops.

Available at checkout: Power adapter (you can buy this during checkout for $6.99), black or white cables (also available during the checkout process, in 25' or 50' lengths).

• Indoor use
• 1/3" digital signal processing video sensor
• Pinhole lens 3.6mm / F2.0
• Lens angle: 90° (wide angle)
• High Resolution: 500 lines
• Effective pixels: 768 x 494 (379k)
• Minimum illumination: 0.1 Lux
• Internal sync.
• Auto electronic shutter: 1/60th to 1/100,000 second
• Auto white balance
• Video output: 1 Vp-p / 75 ohms
• Dimensions: 70mm x 110mm x 49mm (2.76" x 4.33" x 1.93")
• Weight: 185g (6.53oz)
• Power: 12VDC (~120mA nominal)

Motion detector specifications:

• Built-in radiant infrared source
• Motion detection area: 100° horizontal field 2.2 yards high by 11 yards deep (2m x 10m)
• Power: Uses same power source as camera

Lamp relay specifications:

• Internal connector (bare wire terminal block)
• Can turn on any lamp up to 1250 watts total
• Not recommended for flourescent lamps

Alarm relay specifications:

• Internal terminal block connector
• NO or NC connections (plus common)
• Maximum loading: 30VDC, 0.5A

Other

• Dimensions: 2.76" x 4.33" x 1.93" (70mm x 110mm x 49mm)
• Weight:  4.6oz (129g)
• Hardware installation pack and wall mount (with swivel) included.
• Instructions included
• One year warranty.
• Purchase this hidden camera motion detector now for $99.99