PRICE: $252.99

Suggested placement: This extra high resolution (540-lines) outdoor dome security camera works great in any outdoor situation. Put it in parking lots, back yards, garages, and anywhere you'd like to monitor an outdoor setting for movement or intrusion. The varifocal lens lets you home in on specific zones or regions (even items) making it a great camera overlooking registers and display cases.

This indoor/outdoor dome camera has Sony video sensor, a built-in infrared LED array, and a reinforced, coated acrylic dome with high impact resistance (tested with 10lb sledgehammer) coupled with a high grade hard aluminum alloy base. This design gives the camera a high tamper/vandal resistance factor making it perfect for outdoor use in many situations, including urban surveillance scenarios where a lesser camera wouldn't last. Other features include optional cable routing feature and anti-tamper screws.

Enhanced video quality under low and no visible light is possible due to the Sony infrared sensitive video sensor and an array of infrared LEDs under Smart Technology control. The camera automatically senses brightness and available light and turns on groups of IR LEDs in 4 stages - 6, 12, 18, and 28 units on/off as required.

Advanced design features make this camera easy to setup, install and maintain. You can select 12VDC or 24VAC power input (the camera accepts either with no special settings). When you place it or move it you can easily check the aim and focus with a portable monitor - a test composite output (RCA jack) is built into the camera itself so there's no need for a second person or a trip to a remote location to verify camera aim. The internal bracket design allows movement in 3 axis, so you can point the camera virtually anywhere once you've attached it to a wall or ceiling.

Containing a 3-9mm varifocal lens and a high quality Sony video sensor, this camera is a great selection for store front, behind counters, and overlooking display cases. The internal test monitor output makes changes easy so it's a great time saver if you're putting a camera up in an area that might change due to placement of furniture, artwork, vendor booths, kiosks, and similar objects that force you to alter the aim of the camera.

Options Available at checkout: Power adapter, black or white cables.

SPECIFICATIONS

• 1/3" color Sony HQ1 video sensor
• Effective pixels: 768 x 494 (379k)
• Resolution: 540 lines
• 3-9mm varifocal lens with auto-iris, perfect for varying light conditions
• Minimum illumination: 0.5 Lux (F1.2), 0.0 Lux with IR on
• 28 units IR LEDs operating at 850nm with threshold sensing Smart IR technology for automatic control, turning on/off groups as required so the image is never washed out by too much IR.
• Deterrent LED - This model contains a white LED that strobe approximately once every two seconds. This feature an be disabled if not desired.
• Signal-to-noise ratio: >48db
• Scanning system 2:1 interlace
• Video output: 1Vp-p composite video / 75 ohms
• Auto-gain control (AGC)
• Auto white balance
• Auto back light compensation
• Power: 12VDC or 24VAC flexible power input
• Current Draw: 320mA, 550mA with IR on (nominal) +/-10% (nominal)
• Attached video & power cable
• Dimensions: 157mm (diameter at base) x 96mm (H) / 6.18" x 3.78"
• Weight: ~630.5g (1.39lbs)
• Operating temperature: -10 to 45-degrees C (14 to 113-degrees F)
• 3-axis easily adjustable internal bracket
• Internal composite test monitor output
• Installation hardware kit included
• One year warranty.