PRICE: $252.99
Suggested placement: This extra high resolution (540-lines) outdoor dome security camera works great in any outdoor situation. Put it in parking lots, back yards, garages, and anywhere you'd like to monitor an outdoor setting for movement or intrusion. The varifocal lens lets you home in on specific zones or regions (even items) making it a great camera overlooking registers and display cases.
This indoor/outdoor dome camera has Sony video sensor, a built-in infrared LED array, and a reinforced, coated acrylic dome with high impact resistance (tested with 10lb sledgehammer) coupled with a high grade hard aluminum alloy base. This design gives the camera a high tamper/vandal resistance factor making it perfect for outdoor use in many situations, including urban surveillance scenarios where a lesser camera wouldn't last. Other features include optional cable routing feature and anti-tamper screws.
Infrared Range 60-Feet or More
Enhanced video quality under low and no visible light is possible due to the Sony infrared sensitive video sensor and an array of infrared LEDs under Smart Technology control. The camera automatically senses brightness and available light and turns on groups of IR LEDs in 4 stages - 6, 12, 18, and 28 units on/off as required. This infrared LED array casts invisible infrared light up to 20 meters (65.6 feet) at night.
Advanced design features make this camera easy to setup, install and maintain. You can select 12VDC or 24VAC power input (the camera accepts either with no special settings). When you place it or move it you can easily check the aim and focus with a portable monitor - a test composite output (RCA jack) is built into the camera itself so there's no need for a second person or a trip to a remote location to verify camera aim. The internal bracket design allows movement in 3 axis, so you can point the camera virtually anywhere once you've attached it to a wall or ceiling.
Containing a 3-9mm varifocal lens and a high quality Sony video sensor, this camera is a great selection for store front, behind counters, and overlooking display cases. The internal test monitor output makes changes easy so it's a great time saver if you're putting a camera up in an area that might change due to placement of furniture, artwork, vendor booths, kiosks, and similar objects that force you to alter the aim of the camera.
Options Available at checkout: Power adapter, black or white cables.
SPECIFICATIONS
- 1/3" color Sony HQ1 video sensor
- Effective pixels: 768 x 494 (379k)
- Resolution: 540 lines
- 3-9mm varifocal lens with auto-iris, perfect for varying light conditions
- Minimum illumination: 0.5 Lux (F1.2), 0.0 Lux with IR on
- 28 units IR LEDs operating at 850nm with threshold sensing Smart IR technology for automatic control, turning on/off groups as required so the image is never washed out by too much IR.
- Infrared range: 20 meters (65.6 feet)
- Deterrent LED - This model contains a white LED that strobe approximately once every two seconds. This feature an be disabled if not desired.
- Signal-to-noise ratio: >48db
- Scanning system 2:1 interlace
- Video output: 1Vp-p composite video / 75 ohms
- Auto-gain control (AGC)
- Auto white balance
- Auto back light compensation
- Power: 12VDC or 24VAC flexible power input
- Current Draw: 320mA, 550mA with IR on (nominal) +/-10% (nominal)
- Attached video & power cable
- Dimensions: 157mm (diameter at base) x 96mm (H) / 6.18" x 3.78"
- Weight: ~630.5g (1.39lbs)
- Operating temperature: -10 to 45-degrees C (14 to 113-degrees F)
- 3-axis easily adjustable internal bracket
- Internal composite test monitor output
- Installation hardware kit included
- One year warranty.
- Buy this camera now for $252.99!
- To see more cameras and security and surveillance equipment please visit Q5 USA now.
|
|
Facts about our Infrared Security Cameras
Infrared light lies between the visible and invisible (microwave) portions of the electromagnetic spectrum. Infrared light has a range of wavelengths just like visible light has wavelengths that range from red light to violet. "Near infrared" light is closest in wavelength to visible light and "far infrared" is closer to the microwave region of the electromagnetic spectrum. The longer wavelengths are about the size of a pin head and the shorter, near infrared ones are the size of cells, or are microscopic.
The human eye is not designed to pick up infrared light so a beam of infrared light is invisible. The source of the infrared light, depending on the wavelength, may or may not be visible as a small red or orange-red dot (about the size of a match head).
Our infrared security cameras detect infrared light reflected from objects in the field of view. The image appears in monochrome (black-and-white). These cameras contain an internal array of infrared LEDs under automatic control. The range of detectable infrared light cast by each array depends on the video sensor and the camera design (number and placement of IR LEDs). Check each camera description for the IR LED range specification to be sure of the range for the security camera in question - we have cameras that cast a 30', 60', and 120' beam (or greater). We also carry IR projectors that are designed to cast a wide, long range IR beam for cameras that do not have internal IR LEDs. Keep in mind that atmospheric conditions will effect the effective range (fog, snow, rain, etc.).
All of our infrared cameras auto-switch between normal daylight color mode and infrared monochrome mode without user intervention of any kind. |